[ece429] RE: remote login issue

[Rajiv Shah]

Tommy,

Use these settings:

Protocol - ssh2
Hostname - vulcan.ece.iit.edu
Port - 22
Username - 1st character of your first name + upto 7 characters of your last
name
Cipher - 3DES
Mac - MD5
Authentication - Password
SSH Server - Standard

After you set this, you will be able to login.

Rajiv

Message: 2
Date: Mon, 24 Jan 2005 20:43:42 -0600
From: Tommy Ho <hotommy at iit.edu>
Subject: [ece429] remote login issue
To: ece429 at ece.iit.edu
Message-ID: <325d44b325e32e.325e32e325d44b at iit.edu>
Content-Type: text/plain; charset=us-ascii

Hi,

I am having problem logging to the network remotely.  I used the 
Secure CRT software to telnet to vulcan.ece.iit.edu but an error 
message pops up said "The remote system refused the connection".  What 
special setting do I need to do?  Please help.  I need step by step 
setting.

I used a router to connect to internet.  Will that need special setup 
too....

Regards,
Tommy Ho


Message: 4
Date: Tue, 25 Jan 2005 10:39:28 -0600
From: Steve Peters <stevenpeters at gmail.com>
Subject: Re: [ece429] remote login issue
To: ece429 at ece.iit.edu
Message-ID: <27f1da1305012508395dd812fb at mail.gmail.com>
Content-Type: text/plain; charset=US-ASCII

Tommy,

You cannot use telnet to connect to vulcan.  You must use ssh2.  I
don't have SecureCRT on this computer so I can't tell you exactly what
to do, but there should be an option box for it.  Also, I think you
have to change a setting at the bottom to General.  I wish I could be
more specific.  If you get it working, please let us know exactly what
you did.

Steve